lsi megaraid storage manager background initialization

#LSI MEGARAID STORAGE MANAGER BACKGROUND INITIALIZATION HOW TO#
#LSI MEGARAID STORAGE MANAGER BACKGROUND INITIALIZATION DRIVERS#
#LSI MEGARAID STORAGE MANAGER BACKGROUND INITIALIZATION PASSWORD#
#LSI MEGARAID STORAGE MANAGER BACKGROUND INITIALIZATION PLUS#

On this page, select Create virtual drive.

If the machine is sounding an alarm (beeping/chirping), click Silence alarm to stop the alarm.

Once logged in, you will see the overview of your machine.

**NOTE: Variations in the System Name (such as “bjer3u48t”) depends on the model and part number of the Blackjack Server. **NOTE: On the Ubuntu/Linux machines, the LSI RAID Manager login is “ root/admin”

#LSI MEGARAID STORAGE MANAGER BACKGROUND INITIALIZATION PASSWORD#

The system will request the login credentials for the machine.Įnter the User Name and Password for the RAID Manager.īy default, all Windows supported Blackjack® Servers use:.A window requesting the selection of the RAID Card will then display.In the Terminal, log into the shell as the Super User by entering the following command, then press the Enter key.If the icon is not present in Ubuntu/Linux, you can prompt the LSI MegaRAID Storage Manager by opening the Terminal (Ctrl+Alt+T).On both Windows OS and Ubuntu/Linux OS supported DW Blackjack® Server units, there will be an icon on the desktop. Launch the LSI MegaRAID Storage Manager.

#LSI MEGARAID STORAGE MANAGER BACKGROUND INITIALIZATION HOW TO#

This article will outline how to configure a new RAID 5 setup using the LSI MegaRAID that is pre-installed on all DW RAID supported servers. Common reasons for re-configuring the RAID 5 include: In some circumstances, your RAID 5 configuration may need to be rebuilt. Non Coerced Size: 3.637 TB Ĭoerced Size: 3.Configuring RAID 5 Using LSI RAID Manager Last Predictive Failure Event Seq Number: 0 RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3ĭefault Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBUĬurrent Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBUĭrive's postion: DiskGroup: 0, Span: 0, Arm: 5 LDInfo Adapter 0 - Virtual Drive Information: Power Saving option : All power saving options are enabled Support the OCE without adding drives : YesĮnable Copyback to SSD on SMART Error : YesĮnable Spin Down of UnConfigured Drives : YesĪuto Detect BackPlane Enable : SGPIO/i2c SEP Mix of SAS/SATA of HDD type in VD Allowed RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Maximum number of direct attached drives to spin up in 1 min : 0 On board Expander FW version : 25.05.04.00Īuto Detect BackPlane Enabled : SGPIO/i2c SEPĭefault LD PowerSave Policy : Controller Defined Temperature sensor for controller : Absent

#LSI MEGARAID STORAGE MANAGER BACKGROUND INITIALIZATION DRIVERS#

In the end the list of our -AdpAllInfo, -LDInfo, and -PDList of those three hard drivers are attached for further information. It seems that after the hard disk replacement the problem came up.Ĭould anyone suggest me how to fix this problem ? and what's the consequence in case that it cannot be fixed ? Recently we replaced two of the above three hard disks, i.e., (e0xf5/s5) and (e0xf5/s12), due to the original disks broken about 3 weeks ago. We are not quite sure why this problem was raised. Hence I temporarily abort the background initialization. From the event log it seems that the RAID card tried to fix this error, but always failed. It caused the RAID card automatically start background initialization again and again. It is quite strange that the uncorrectable medium error appeared exactly at the same address e0377d38 in three hard drives (e0xf5/s15), (e0xf5/s5), and (e0xf5/s12). Recently we found the following the same 'Patrol Read' error event logs happened in 3 of the on-line hard drives in the RAID5: Code: 0x0000005fĮvent Description: Patrol Read found an uncorrectable medium error on PD 1b(e0xf5/s15) at e0377d38Įvent Description: Patrol Read found an uncorrectable medium error on PD 11(e0xf5/s5) at e0377d38Įvent Description: Patrol Read found an uncorrectable medium error on PD 15(e0xf5/s12) at e0377d38

#LSI MEGARAID STORAGE MANAGER BACKGROUND INITIALIZATION PLUS#

We have a storage machine (file server) with a LSI Megaraid 9260-16i RAID system, and 15 hard drives configured as RAID5 plus one off-lined hard drive which is going to be replaced.

Lsi megaraid storage manager background initialization